Accueil - Produits - [Xhorse] - Programmeur De Clef - Multi Outil BMW OBD2 CAS1-4 Clé Programmeur V7.7
« Revenir

Multi Outil BMW OBD2 CAS1-4 Clé Programmeur V7.7

Numéro de l'article. SK97
Manufacturer: Xhorse
Out of Stock
Prix de détail:€865.51
Achat immédiat:€789.00 Vous économisez €76.51
Les frais d'envoi:
Livraison Gratuite   Livraison Express Service 
Délai de livraison estimé: 3-5 jours de travail. Détails
Poids:
0.3KG
Paquet:
23cm*16cm*5.5cm      ( Inch:9.03*6.28*2.16 )
Retours:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour.Lire les Détails »
Télécharger des fichiers connexes:
  bmw-multi-tool-ews-and-cas-connection-show.pdf  (258.6K)
  bmw-multi-tool-user-manual-english.pdf  (2,677.0K)
Acheter des produits connexes et obtenir un bon prix !
Original Xhorse VVDI2 V1.2.5 Commander Key Programmer Full Version Pour VW/Audi/BMW/Porsche
VVDI2 includes all the VVDI functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.
More ever, users do no need to connect VVD2 with computer or other devices to identify chip or detect remote frequently.    Détails »
Achat Immédiat: €2,085.00
Quantité:  
Add to Cart
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine English Version
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine is easy to use and powerful key cutting machine with most advanced software and precised mechanism.
Version: V2.2.9    Détails »
Achat Immédiat: €2,759.00
Quantité:  
Add to Cart
Key Pro M8 Auto Clé Programmeur M8 Diagnostic Locksmith Appareil Avec 800 Tokens
Key Pro M8 Auto clé programmeur est l'outil le plus puissant, efficace et rentable pour vous pour ajouter des clé et de faire de nouvelles clés. Il supporte une gamme complète de modèles de voitures, supporte la mise à jour en ligne et très facile à utiliser. Choisir la clé Pro M8 Auto clé programmeur est un grand atout et génère un excellent retour sur investissement, en fournissant une source de revenus supplémentaires pour votre entreprise.    Détails »
Prix de détail: €1,450.00Achat Immédiat: €1,425.00  2%  Vous économisez €25.00
Quantité:  
Add to Cart
BMW multi outil comprend des pièces de suite, dispositif matériel, dongle, programmeur, logiciel. Avant logiciel fonctionnant vous devez vous connecter dongle et le matériel périphérique de l'ordinateur.

Multi Tool OBD2 CAS1-4 Key Programmer Pour BMW
Newest version: V7.7

Notice: Si  vous voulez faire cas 4 ,il  faut acheter un SK97-B 


Attention:Autorisation de cryptage de BMW CAS4, si vous avez SL252, l'autorisation est gratuite, sinon,les frais sont de 550USD.

Top 4 Reasons to Get BMW Multi Tool:
 
1. Language: English
2. Powerful Than AK300!!!
3. Support Encrypt CAS3 and CAS4
4. Software Version: V7.7
 

BMW Multi Tool V7.6 Update:
1. Fix the bug that CAS4 key won’t work after generation failure. Now, CAS4 key can continue to be used before done, it could be matched for other vehicles.
2. Other bug fixup.

BMW Multi Tool V7.6 Update tips:
1.Fix CAS4 make key procedure. If first make key not success, it can be use next time until it make success.
2.Normal bugfix

BMW Multi Tool V7.5 Update tips:
1.Free for all user: Make dealer key for CAS4 encrypt version, support add key and lost all key. No need condor authorize
2.Normal bugfix
 
BMW Multi Tool V7.4 Update:
1. Fix the error that BMW CAS3+ smart key not work after generation. 
2. Key learning -> fix up smart key change, enable to fix the error that smart key not work.
3. Fix the error that EWS generate dealer key but sometimes not work. 
4. Fix other bug
 
Notice:
Make Sure Connect Dongle to Computer Before Run the Software.
 
 
Comment résoudre le BMW X1 qui a perdu toutes les clés par BMW outil multifonctions 


BMW Multi Tool Description:
 
1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link connector (DLC).
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.
 
 
BMW Multi Tool Specifications:
 
1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W


BMW Multi Tool Supported Function Including:
 
1. Car access sytem dentification
2. Read/Write CAS EEPROM(OBDII)
3. Read/Write KM stored in CAS system(OBDII)
4. Read/Write synchronization codes stored in CAS system(OBDII)
5. Synchronize DME and CAS(OBDII)
6. Synchronize CAS and ELV(OBDII)
7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
8. Read/Restore CAS KEY information(OBDII)
9. Disable/Enable key with working key(OBDII)
10. Clear DTC and Shadow (OBDII)
11. Prepare dealer key with CAS eeprom dump
12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information
13. Change KM in CAS and instrument dashboard with file dump
14. Have key programmer, you can programm dealer key directly.
 
Pay Attention to the Function: Help->Device update.
 
You can get the latest software version and firmware verion when you can access to internet.
 
1. Menu:
- Tool: you can choose language here, support "English" and "Chinese Simplified" Restart software to apply your settings.
- File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
- Help: Device update. You can get your device and dongle id version and update it.
 
2. Protocal Type:
Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you to choose the right protocol. After choose protocol okay, then press "Connect". If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc.
 
3. EEPROM Function:
Read EEPROM, Write EEPROM, Save File, Load File…
1). You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.
2). Now can't read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM, it will give tips (Press ok to continue).
 
4. Odometer:
Support read and change KM stored in CAS system.
Don't support to change KM in instrument. If you want to change the KM display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.
 
5. Synchronization Codes:
1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
2). Synchronize DME and CAS— this function will be useful while prepare dealer key or any other operation which cause can't start the engine.
3). Synchronize CAS and ELV — this function can help clear wheel errors
 
6. Key Learn
1). Get Key Info: With this function you can get the key cutting, remote frequency, and key data.
2). Save Key Info: Save the read key info.
3). Load Key Info: Load the saved key info. To see the key data and prepare for write key info.
4). Write Key Info: Write the loaded key info into CAS system.
5). Make Dealer Key: You can prepare dealer key after you get key info successfully. Also you should choose the key position.
6). Add key: Add the new dealer key into CAS system. Some CAS system needs this step to start the engine.
7). Enable Key: Insert the current key into ignition switch, press "Enable Key". The key after current key will be enabled.
8). Disable Key: Insert the current key into ignition switch, press "Disable key". The key after current key will be disabled.
9). Clear DTC: Before prepare dealer key and after it you can use this function to clear DTC.
10). Clear Shadow: Before prepare dealer key and after it you can use this function to clear Shadow.
 
7. File Make Key
1). Choose CAS or EWS type.
2). Load the choose EEPROM file you will get the make dealer key window.
3). Choose key position and press "Make Dealer Key" button. Flow the given tips to prepare dealer key. After succeed you can save the new EEPROM dump file.
- For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can start the engine directly.
- For some CA3+ type you need to write back the new dump file into car.
4). CAS3 encrypt data, only OBDII prepare make key is support for CAS3 encrypt data.
 
 
BMW Multi Tool Packing List:
 
1*BMW Multi Tool Main Unit
1*USB Dongle
1*OBD II CONNECTOR
1*USB CONNECTOR
 
 
FAQ:
 
Q1: Could you please let me know if bmw multi tool  has EWS function ?
A1: Yes,it can do EWS,you need to detach the device then connect with CAS socket to read EWS data.
 
Q2: Can BMW MULTI TOOL do BMW cas3 and cas3+ keys? For example, the 868 MHz key.
A2: Yes, BMW MULTI TOOL can do most kinds of BWM keys.
 
Q3: Can BMW Multi Tool V6.0 do the EWS ?
A3: Yes, but you should withdrawing the EWS when you want to read the data. Reading the data you should have a CAS socket.
 
Q4: When during make keys appear "failed at the security access", how to solve it?
 
Add Key OBD:
cas3+ encrypt version -> no need to update CAS (no need for key cycling)
cas ISTAP4x version -> need to update cas (no need for key cycling)
 
Lost Key OBD:
cas3+ encrypt version -> no need to update CAS (need to cycle key UPTO 16 times)
cas ISTAP4x version -> need to update CAS (need to cycle key UPTO 64 times)
 
Add Key Dump Method (Lost or Working Key):
 
cas3+ encrypt version -> need to write back to CAS (needs either -working key / known ISN / ECU dump / or cycle UPTO 16 times)
 
cas ISTAP4x version -> no need to write back to cas (needs either -working key / known ISN / ECU dump / or cycle UPTO 64 times)
 
So the 64 cycle is really to save you having to downgrade the CAS but you still need to manually read the CAS for this option. For me this is still the best  way as theres no way I would downgrade the CAS (unless you made it very clear what this meant to the client)
 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.


Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.
2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison est Yanwen EMS, délai de livraison est 8-13 jours.


Contact informations:

Email: sales@diyobd2.fr
Skype: diyobd.fr
WhatsApp: +86 15826108827


Online service support
Facebook: https://www.facebook.com/diyobd2.fr

Si vous avez des questions, n'hésitez pas à nous contacter.
Donnez votre avis
* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre adresse e-mail:
* Afficher les avis:
*Code de vérification:
          Aucun droit? Obtenir un nouveau code de vérification
 
Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît assurez-vous que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. Commentaires inappropriés ne seront pas affichés.
Après-vente et questions: Contactez notre Service à la clientèle. (Un représentant clientèle vous contactera pour vous).
S'il vous plaît Inscrivez en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.
Peut-être que vous aimez aussi ...
ND900 4D Decoder
€89.30
75%
R270+ V1.20 CAS4 BDM Programmer For BMW
€119.00
T300 key programmer English V2014.14.6
€115.00
Je veux acheter plus accessoires compatibles avec l'article.
Bookmark It