Accueil - Produits - Truck Ad-Blue Emulator Emulateur - Truck ad-blueobd2 Emulator for Volvo Bonne Qualité
« Revenir

Truck ad-blueobd2 Emulator for Volvo Bonne Qualité

Numéro de l'article. SH35
In Stock
Achat immédiat:€27.77 
Quantité:
  
Les frais d'envoi:
Livraison Gratuite   Poste Ordinaire Service 
Délai de livraison estimé: 10-20 jours de travail. Détails
Poids:
0.1KG
Paquet:
15cm*10cm*5cm      ( Inch:5.89*3.93*1.96 )
Retours:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour.Lire les Détails »
ad-blueobd2 Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle.

Volvo ad-blueobd2 Emulator

Volvo ad-blueobd2 Emulator Description:

ad-blueobd2 Emulator Box designed to disable ad-blueobd2 system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates ad-blueobd2 Emulator Box bypasses electronic module of the ad-blueobd2 system on vehicle.

It is very easy to fit ad-blueobd2 Emulator Box to any truck or bus equipped with ad-blueobd2 system and it will override ad-blueobd2 system instantly, it will stop the usage of ad-blueobd2 liquid. ad-blueobd2 Emulator Box disables

ad-blueobd2 system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.

This device works without interfering to work of other electronic systems of the vehicle. ad-blueobd2 Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the ad-blueobd2 Emulator Box and you can install it on any supported truck.

Volvo ad-blueobd2 Emulator Installation:

The connections details diagram and wire colours refer to VOLVO FH16 Year 2008, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original
ECU, ad-blueobd2 liquid is higher than the reserve level and the truck batteries are disconnected from the system.

Volvo ad-blueobd2 Emulator Wiring:

5 conductors:

1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).
2) BLACK(0V). To be connected to an earth.
3) GREY(+30). To be connected to a 24V supply always available to the existing ad-blueobd2 system (25A protection fuse and the ad-blueobd2 system).
4) WHITE(CAN H). To be connected to CAN H of the system.
5) BROWN(CAN L). To be connected to CAN L of the system. The connections must be made under the box of the connectors located on the chassis.

Volvo ad-blueobd2 Emulator Activation:

The minusblue module and the original ad-blueobd2 module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working. It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 25A fuse and the existing ad-blueobd2 module.

If you want to stop and exclude the original ad-blueobd2 module from working, all that needs to be done is to remove the 25A fuse before starting the engine. The minusblue module will automatically be activated. To re-instate the original ad-blueobd2 module, all that needs to be done is to reinstall 25A fuse before starting the engine. The minusblue module will automatically be de-activated.

Volvo ad-blueobd2 Emulator Self-Learning:

When the minusblue module is fully connected to the electrical circuit of the original ad-blueobd2 module, and after identification of the 25A fuse controlling the power feeding to the original ad-blueobd2 module the truck batteries can be Re-connected.

The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).

1) Make sure the 25A fuse is inserted.
2) Turn on the dashboard(key on) and verify that the red led is on.
3) After approx 1 minute the red led will turn off and the green led will Turn on.
4) Switch off the dashboard(key off).

After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).

The Result will be:

1) If the 25A fuse is installed the original ad-blueobd2 system will be working. Both red and green leds will be on.
2) If the 25A fuse is not installed the original ad-blueobd2 system will not be working and the minusblue module will be activated. Both red and Green led will be flashing.

NOTE: ALL THE OPERATIONS WITH THE 25A FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF(KEY OFF).

LED FUNCTION ON - OFF

KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.
KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.
KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.
KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.
KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.
KEY ON:- RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED


When this box connected - ad-blueobd2 system of the truck would be fully emulated, no errors related to ad-blueobd2.The box can be fast and easy installed to truck.
You can disconnect it, reset and install into another truck



 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.


Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.
2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison est Yanwen EMS, délai de livraison est 8-13 jours.


Contact informations:

Email: sales@diyobd2.fr
Skype: diyobd.fr
WhatsApp: +86 15826108827


Online service support
Facebook: https://www.facebook.com/diyobd2.fr

Si vous avez des questions, n'hésitez pas à nous contacter.
Donnez votre avis
* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre adresse e-mail:
* Afficher les avis:
*Code de vérification:
          Aucun droit? Obtenir un nouveau code de vérification
 
Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît assurez-vous que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. Commentaires inappropriés ne seront pas affichés.
Après-vente et questions: Contactez notre Service à la clientèle. (Un représentant clientèle vous contactera pour vous).
S'il vous plaît Inscrivez en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.
Mots-clés de produit:   Ad-Blue Emulator   emulator  
Bookmark It